Provides temperature, humidity and dew point readings that can be used to monitor, control, and maintain environmental conditions of highly critical areas. The Protege system can also use this data to trigger reportable alarms when normal operating conditions are exceeded.
Extends the system by providing one additional input, ideal for adding PIR’s, smoke detectors, and any other dry contact input devices.
Allows the interface of a PC with a USB interface to communicate with RS-485 networks. Featuring high voltage galvanic isolation that helps to protect any personal computer that is attached to an RS-485 network from spurious voltage transients, lightning and other forms of electrical disturbance.
C7 Power connector, with a 2 pronged plug to match electrical outlets in North America. 2m in length.
C7 Power connector, with a 3 pronged plug to match electrical outlets in New Zealand and Australia. 2m in length.
C7 Power connector, with a 2 pronged plug to match electrical outlets in Europe. 2m in length.
Transformer 16VAC 40VA with 3A fused mains termination. Suitable for use with all Protege modules, except the PRT-PSU-5I and ACC-PSU-5A power supply modules.
Single Pole Relay 7A Form C Output +12V coil with low current transistor triggered input both positive and negative. Relay activated LED indication, ideal for use on alarm system outputs.
Double Pole Relay 2A Form C Output +12V coil with transistor triggered input both positive and negative. Relay activated LED indication, ideal for use on alarm system outputs.
In line fuse holder including 5A fast blow fuse. Required on all UL/ULC certified installations where the Marcus M4758CT wire-in transformer is used for 16VAC supply.