ICT Accessory/Battery Enclosure
EN-DIN-ACC
The ICT Accessory/Battery Enclosure is designed to house accessories for your Protege system, including the larger batteries recommended for Protege 5A and 10A power supplies.
- Space for two 22Ah batteries
- Dedicated tamper switch
- Removable door for fast installation
- Cam lock for secure access
- 7 conduit cable knockouts plus IEC mains knockout
- 9 cable tie points for clean field wiring
- IP50 rated
- ASIAL Class 5 compatible
Features
Outage Protection
Provides space for two 22Ah batteries, enabling the system to continue operating at full load even during an extended power outage.
Easy to Install
The enclosure’s removable door, finger trunking spaces, cable tie points and convenient knockouts help you achieve a fast and clean installation.
Tamper Monitoring
Includes a dedicated tamper switch, sending a signal to the Protege system when the door is opened.
Certified
Compliant for ASIAL Class 5 installations when protected by a DSC SS-102 Shockgard seismic vibration sensor.
Specifications
| Ordering Information | |
| EN-DIN-ACC | ICT DIN Accessory/Battery Enclosure |
| Cable Entry | |
| Cable Knockouts | 7 conduit cable knockouts, 1 knockout for IEC mains voltage connector |
| Cable Tie Points | 9 points for field wiring |
| Cables | Supports the Fused Panel Mount IEC C14 Socket and the Quick Connect RS-485 Daisy Chain Cable |
| Earthing | |
| Wire Looms | Bond wire looms included for earth connection to the enclosure |
| Accessories | |
| Tamper | Dedicated hardware tamper input |
| Lock | Cam lock |
| Environmental IP Rating | |
| IP Rating | IP50 |
| Dimensions | |
| Finger Trunking Space | 25mm |
| Dimensions (H x W x D) | 200 x 433 x 100.3mm (7.9 x 17 x 3.9") |
| Net Weight | 3.7kg (8.0lb) |
| Gross Weight | 4.0kg (8.8lb) |
| Compliance | |
| Standards | Australia/NZ: AS/NZS 2201:2007 Class 5 |
Downloads
Supporting Material
Certifications & Warranties
Regulatory Notices
AS/NZS 2201.1 Class 5
Protege systems conform to AS/NZS 2201.1:2007 Class 5 intruder alarm systems standards for the construction, operation, performance and installation of intruder alarm equipment and systems installed in clients' premises.
